10KW Three Phase Distributed On-off Micro Grid System

Product Description

♣ Contact information

SamZhou
Whatapp: +86 13189771281
Skype: CNSAMZHOU
Wechat: astrolumin / +8613189771281
Tel.: 00 86 13189771281
Email: Sam@poweroak.info /  cnsamzhou@163.com
Linkedin: https://www.linkedin.com/in/cnsamzhou
Website: www.poweroak.info ; www.kayomaxtar.com

 

10KW Three Phase Distributed On-off Micro Grid System

Feature:

1. The commercial solar generator with CPU intelligent control technology, high-performance security;


2. Pure sine wave output, the output frequency are 50HZ, coincide with the mains, it also can be applied to any (not greater than the present maximum output power) loads, including motors, compressors, relays, fluorescent lamps, laser printers, impact drill and some not analog sine wave and modified sine wave inverter drive electrical equipment;


3. Perfect protection function(including overload protection, overcurrent protection, high temperature protection, short circuit protection, reverse battery protection, battery level protection, high and low mains voltage protection, etc.), to make users feel good.


4. Small noise in this commercial solar generator, there is no noise in addition to high-temperature radiator fan running small noise.
* More specifics and detailed product features or other custom feature, pls contact with our R&D department, those specifications are subject to communication.

10 KW Three Phase Hybrid Solution

Solar Off Grid Topology Architecture

When the grid is disconnected or breakdown, our system will works in Off Grid mode. Under this mode, the unit will transfer solar power or electricity stored in the battery to AC, to power up all the loads.

Solar on Grid Topology Architecture

 

All loads’ power will be provided by our system, the unit will use battery storage to power the loads under premise of normal capacity. If PV electricity is more than the loads need at the same time by charged fully, it will feedback excess electricity to the Grid.

If the battery is low and the sunshine is bad, the system will firstly assure battery capacity is sufficient and use the grid electricity to power loads.

Specification:

Model Name                      MG3210K Distributed On-off Micro Grid System  
Continuous Rated Power 10KW  
AC Parameters
Rated Alternating Voltage Grid Voltage 400VAC
Inverter Voltage 400VAC
Rated AC Frequency 50Hz
Total Harmonic Distortion Grid Current <4%
Inverter Voltage 2%
On/off Grid Switching Time < 20ms
Maximum Inverter Efficency 93.80%
≥92%
Referenced Certification Standard CE,VDE 0126-1-1
Output Wave Pure Sine Wave
DC Parameters
Recommended Each line PV Input Power 4000W  
PV Input 3 lines  
Each PV Line Panels Start-up Maximum Voltage 145VDC(under definite lowest temperature condition)
MPPT Voltage Range 70~120VDC
PV Maximum Output Current 240A  
Charger Maximum Efficiency 97.30%
Battery Voltage Rated Value 52VDC
Working Range 48~57VDC
System Parameters
Stored Capacity ≥30KWh
External Communications RS485(RS232/USB/Internet Optional)
Working Environment Temperature 0oC~45oC
Working Environment Humidity 10%~90%
Altitude <2000m
IP Grade IP54
Dimension Battery Box 1130mm×800mm×600mm
Inverter Box 1130mm×800mm×600mm
Weight Battery Box 240kg
Inverter Box 210kg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pictures: